Features

• Removes Moisture Without Pulling a Vacuum ProDry is designed to help eliminate moisture from the system without using a vacuum pump—ideal when moisture protection is the priority.
• Converts Moisture Into Oil Contains a dehydrating agent that converts system moisture into a synthetic oil to support lubrication and system protection.
• Helps Neutralize Acids & Fight Corrosion Moisture can contribute to corrosive acid formation and component wear over time. ProDry helps reduce moisture to support cleaner operation and efficiency
• Same Compatibility as Enviro-Safe Stop Leak Compatible with systems using R134a, R1234yf, R12, R600a, and R290 (use only with the correct system oil/refrigerant type for the application).
• Installs Like Refrigerant + Important Use Notes Installs the same way as refrigerant. Cannot be added to a fully charged system. Gas-propelled aerosol. Do not use in ammonia, CO₂, or R410A systems.

Ships from our US warehouse to any Canadian province in 5-8 business days.

The post ENVIRO-SAFE ProDry Moisture Remover for A/C Systems – No Vacuum Pump Needed – Works with R134a, R1234yf, R12, R600a & R290 – Installs Like Refrigerant (1 Can) appeared first on GetASave — US Auto Parts for Canada.

• MOISTURE INSIDE YOUR SYSTEM IS DESTROYING IT – this is the only product that fixes all three problems at once. Moisture in a refrigerant system mixes with refrigerant to form acid – corroding coils, attacking the compressor, accelerating leaks. If your system has been recharged more than once, moisture is likely the real problem. One inject: ProSeal seals the leak, ProDry neutralizes the moisture, UV dye marks the site.
• WORKS WITH R410a, R22, R32, R454B, R134a AND MORE – all residential refrigerants covered. Compatible with every refrigerant and oil in standard residential systems. Not for ammonia or CO2. For systems 1.5-5 tons. The 3-in-1 is the right choice for any system over 10 years old or in a high-humidity region.
• NO PUMP-DOWN – inject into a running system in under a minute. Connect to the low-side port. Inject using refrigerant or the high side pressure. Disconnect. All three formulas inject together in one trigger pull. No second application. No vacuum pump. Let the system run 45 minutes. Done.
• SAFE FOR TXVs, EXPANSION VALVES, AND ALL OILS – never voided a warranty. Both the sealant and moisture remover are safe for all system components. The dehydrating agent in ProDry converts moisture to synthetic oil – it does not leave residue or void manufacturer warranties.
• THE RIGHT CHOICE FOR OLD SYSTEMS AND HIGH-HUMIDITY CLIMATES – original manufacturer since 2014. If your system is pre-2010, has visible corrosion, or is located in the Southeast, Gulf Coast, or Pacific Northwest – moisture contamination is almost certain. Use the 3-in-1, not the standard. Enviro-Safe has made this formula since 2014. Made in the USA.

Ships from our US warehouse to any Canadian province in 5-8 business days.

The post ENVIRO-SAFE AC Stop Leak 3-in-1 for R410a and R22 | Refrigerant Leak Sealer, Moisture Remover, UV Dye | Direct Inject | Central AC, Heat Pump and Mini-Split | 1.5 to 5 Ton ProSeal XL4 appeared first on GetASave — US Auto Parts for Canada.

• Removes Moisture Without Pulling a Vacuum ProDry is designed to help eliminate moisture from the system without using a vacuum pump—ideal when moisture protection is the priority.
• Converts Moisture Into Oil Contains a dehydrating agent that converts system moisture into a synthetic oil to support lubrication and system protection.
• Helps Neutralize Acids & Fight Corrosion Moisture can contribute to corrosive acid formation and component wear over time. ProDry helps reduce moisture to support cleaner operation and efficiency
• Same Compatibility as Enviro-Safe Stop Leak Compatible with systems using R134a, R1234yf, R12, R600a, and R290 (use only with the correct system oil/refrigerant type for the application).
• Installs Like Refrigerant + Important Use Notes Installs the same way as refrigerant. Cannot be added to a fully charged system. Gas-propelled aerosol. Do not use in ammonia, CO₂, or R410A systems.

Ships from our US warehouse to any Canadian province in 5-8 business days.

The post ENVIRO-SAFE ProDry Moisture Remover for A/C Systems – No Vacuum Pump Needed – Works with R134a, R1234yf, R12, R600a & R290 – Installs Like Refrigerant (3 Cans) appeared first on GetASave — US Auto Parts for Canada.

Features

• COMPLETE KIT: Professional 4-piece R1234YF AC recharge kit includes 2 cans of Arctic Air, 1 can of oil charge, 1 can of stop leak, and 1 gauge for comprehensive system maintenance
• ARCTIC AIR PERFORMANCE: Dual-action formula removes moisture to prevent system corrosion while reducing friction for improved cooling performance and colder air duct temperatures
• OIL CHARGE FUNCTION: Specialized oil blend restores proper lubrication levels in systems that have lost oil charge due to leaks or malfunctions, compatible with mineral, ester, and PAG oils
• STOP LEAK TREATMENT: Reconditions and swells rubber O-rings and seals to help prevent refrigerant loss, with one can treating a complete vehicle system
• INSTALLATION REQUIREMENTS: Requires proper R1234YF compatible hose or gauge for installation which comes with this kit, cannot be added to fully charged systems, and installs similarly to standard refrigerant

Ships from our US warehouse to any Canadian province in 5-8 business days.

The post ENVIRO-SAFE R1234YF Auto AC Recharge Kit with Arctic Air, Oil Charge, Stop Leak, Gauge, 4-Piece Professional System appeared first on GetASave — US Auto Parts for Canada.

Ships from our US warehouse to any Canadian province in 5-8 business days.

The post Enviro-Safe Magnum D.I. Direct Inject Gun with Proseal XL4 5 ton Inject, Easy to Use Kit #9850 appeared first on GetASave — US Auto Parts for Canada.